ST MODELS MX2 ARTF Foam-e & 2 X Dynamic 3S 2200MAH LIPO BATTERIES (WITH CONNECTORS FITTED_

ST MODELS MX2 ARTF Foam-e & 2 X Dynamic 3S 2200MAH LIPO BATTERIES (WITH CONNECTORS FITTED_

£159.99

Add to cart

KIST051

ST MODELS MX2 ARTF Foam-e & 2 X Dynamic 3S 2200MAH LIPO BATTERIES (WITH CONNECTORS FITTED_

More details

» Add to my wishlist

10 other products in the same category:

Previous
Next

 

Want a sports aerobatic model that is economic to buy, economic to operate and stunning to fly? You''ve just found it!

The ST Models MX-2 is based on the full size, aerobatic aircraft of the same name and then modified for model flying characteristics.

Supplied complete with powerful 920Kv brushless motor, 12 x 5 propeller, a 36A brushless ESC, four powerful new 9g servos and with them all pre-installed. All that is needed is 30 minutes of final assembly and applying the stunning colour decals.

Setups are provided for both sports and 3D flying (even mixes). For serious 3D pilots, the movements make maneouvres like static loops, rolls and the ''waterfall'' and ''parachute'' quite within your reach.

To provide that 3D control power with precision has been achieved with a totally new servo amplifier to give high resolution and holding power combined with strong torque. The control pushrods are kept short by placing each servo close to the surface it is operating.

Using a 3S 2100-2500mAh Li-Po, there is enough power to hover vertically with ease and then punch out straight up! The choice of a 12 x 5 propeller limits the ''torque'' turn effect and eases current consumption by matching the load and motor power/Kv rating effectively. Torque rolls are possible in both directions. Access to the battery is via a clip-in underside hatch, simple!

Like all ST models, the airframe is moulded accurately in ''ding'' resistant EPO foam. The wings are removable by removing the two quick turn locking screws and sliding out of the fuselage, great for compact transportation. Access to the radio compartment requires pulling off the clip-on canopy moulding.

The tough, aluminium undercarrige soaks up those landings on our club patches so well, but the model is hardly moving forward anyway!

As a model to hone your aerobatic skills or just cruise around on a Sunday afternoon, the ST Models MX-2 is hard to beat.

And it looks ''cool'' too!

Specification
Wingspan: 1210mm (47.6in)
Length: 1106mm (43.5in)
Weight: 960g (33.8oz) Typical
Wing Area: 27.3dm2 (423.2 sq.in)
Wing Loading: 35.16 g/dm2 (11.5 oz.sq.in)
LiPo: Intellect 3S 2100mAh 20C Recommended

THIS VERSION INCLUDES 2X 3S 2200MAH DYNAMIC BATTERIES